AK Interactive Ultra Matt Varnish 100ml – Dead-Flat Sealer for Miniatures

AK Interactive Ultra Matt Varnish – Dead-Flat Acrylic Sealer for Scale Models, Figures, and Miniatures

• Highest Matting Agent Concentration in AK's Range – Ultra Matt Varnish contains a significantly higher proportion of matting agents than standard matt varnishes, which is what produces the dead-flat finish. The trade-off is that this high-matting formula requires thorough shaking before every use to redisperse settled matting agents — otherwise the finish will read as patchy.
• Flatter Than Testors Dullcote and Vallejo Matte – In side-by-side community testing across Warhammer, 1/35 armor, and 28mm figure painting, AK Ultra Matt Varnish consistently produces a noticeably flatter finish than the two most common competitors. This is the specific choice when "matte" isn't matte enough for the subject or the lighting.
• Water-Soluble, Odorless, Non-Toxic – Safe for indoor application without a respirator or dedicated ventilation. Cleans up with water during painting and with AK11505 Perfect Cleaner for airbrush residue. Dries completely in 12 hours.
• AK's Original Ultra-Matte Formula – AK Interactive was the first brand to bring an ultra-matte varnish to the scale modeling market over a decade ago. AK11252 is the 100ml dropper-bottle version of that formula, part of the 3rd Generation acrylic ecosystem and compatible with AK11500 Acrylic Thinner.

📝 Product Description

Standard matt varnish leaves a small amount of residual sheen. For most scale modeling subjects this is invisible or even desirable — it preserves color depth and keeps metallics from going completely dead. But there are specific subjects where standard matt is not flat enough: competition figure painting, matte camouflage patterns, winter schemes, flat-coated historical uniforms, and any model photographed under strong directional lighting. For those subjects, you need an ultra-matte varnish — a formula with a higher concentration of matting agents that takes residual sheen to zero.

AK Interactive Ultra Matt Varnish is the original product in this category. AK was the first brand to release a dedicated ultra-matte varnish for scale modeling, and the formula remains the hobby community's benchmark for deep matte finishes. The 100ml dropper bottle format (SKU AK11252) provides enough volume to seal multiple full-scale armor kits, a complete figure collection, or an entire diorama from a single purchase. The product is part of AK's 3rd Generation (3GEN) acrylic system and pairs with AK11500 Acrylic Thinner for airbrush dilution.

💡 How to Use

Shake the bottle thoroughly before every use — the matting agents settle at the bottom and must be fully redispersed, or the finish will look patchy. Apply over fully cured paint and completed weathering layers. For direct brush application, dip lightly and use thin even strokes in a single direction without overworking the surface. For airbrush work, dilute with AK11500 Acrylic Thinner and spray at low pressure in multiple light passes rather than one heavy coat — ultra-matte varnishes require even coverage because their high matting agent content is sensitive to application thickness. Allow 12 hours for full cure before handling or masking. Test on a scrap surface first — ultra-matte varnish is harder to remove cleanly than standard matt if something goes wrong on the first pass.

📐 Specifications

• Brand: AK Interactive
• Product Name: Ultra Matt Varnish
• Product Line: 3rd Generation (3GEN) Acrylics
• Finish: Ultra Matte (Dead-Flat)
• Style Number: AK11252
• UPC: 8435568331341
• Formula: Water-Based Acrylic, Non-Toxic, Low Odor
• Volume: 100ml Dropper Bottle
• Compatible Thinner: AK11500 Acrylic Thinner
• Compatible Cleaner: AK11505 Perfect Cleaner, or water for brushes
• Apply Over: Fully Cured Acrylic, Lacquer, or Enamel Paints
• Drying Time: 12 hours full cure
• Country of Origin: Spain